Goeie dag.
Vriend van my is opsoek na patrone of komponente om te herlaai vir n 7.65 Argentine Mauser.
Weet een van julle waar n man so iets kan kry.
Lekker dag.
7.65 Argentine Mauser
-
jacojrdn
- Sr. Member
- Posts: 312
- Joined: Sun Nov 27, 2011 1:31 pm
7.65 Argentine Mauser
S410 Air arms,.22 Anchutz,.22 Remington,.243 Win Musgrave,.303 Brit,Blaser R8 .223 Rem,R8 .300 Win Mag,
R8 .375 H&H Mag, Tikka T3X CTR 6.5 Creed, CZ Rami 9mm.22 Beretta,9mm Walther P38,.44 mag 7.5 SS Ruger SBH ,S&W XVR 460,12 boor pomp.
R8 .375 H&H Mag, Tikka T3X CTR 6.5 Creed, CZ Rami 9mm.22 Beretta,9mm Walther P38,.44 mag 7.5 SS Ruger SBH ,S&W XVR 460,12 boor pomp.
-
tripodmvr
- Administrator
- Posts: 21608
- Joined: Fri Mar 11, 2011 8:31 pm
Re: 7.65 Argentine Mauser
Antwoord uit milsurps.com
I do not nor have I ever used VV powders in my mod 91 mauser. I usually make my own cases from any good reformable cases 30-06, .270 Win, .280 Rem., ect. using a RCBS file trim die, hack saw and file. I also aneal the heck and shoulder before re-forming. Yes they are just a tiny bit small but in my experience of over 40 years they work just fine. I have shot a few of the heavy bullets that you mention but my hunting loads are always either a 150 grain soft point or 123-125 grain fmj or soft point. May I suggest that you work up your load starting low and going where you decide to go, a 91 is a very well made and fine rifle but not as strong a action as a 98. For powder I use IMR 4320 or IMR 4895 but I would imagine that there are lots more that can be used. My primers are almost always CCI but most any Large Rifle will do except for magnum.
I do not nor have I ever used VV powders in my mod 91 mauser. I usually make my own cases from any good reformable cases 30-06, .270 Win, .280 Rem., ect. using a RCBS file trim die, hack saw and file. I also aneal the heck and shoulder before re-forming. Yes they are just a tiny bit small but in my experience of over 40 years they work just fine. I have shot a few of the heavy bullets that you mention but my hunting loads are always either a 150 grain soft point or 123-125 grain fmj or soft point. May I suggest that you work up your load starting low and going where you decide to go, a 91 is a very well made and fine rifle but not as strong a action as a 98. For powder I use IMR 4320 or IMR 4895 but I would imagine that there are lots more that can be used. My primers are almost always CCI but most any Large Rifle will do except for magnum.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br
-
ThinusS
- Sr. Member
- Posts: 317
- Joined: Sun Jul 17, 2011 10:00 am
Re: 7.65 Argentine Mauser
Daar was verlede week nog n paar pakke doppe by Kloppers in Bloemfontein se wapenafdeling.
