Welger AP61 Bailer

Enige besprekings/vrae ivm boerdery bedrywighede.
Post Reply
Wayne
Hero Member
Hero Member
Posts: 1007
Joined: Sat Mar 24, 2012 5:36 pm

Welger AP61 Bailer

Post by Wayne »

Has anyone got a parts book for the wire knotter system on the above mentioned bailer. I can not seem to find the correct part numbers. I know what I need, but to try and explain to someone over the phone, most have no idea on what I am talking about.
Hoping for some help.....
User avatar
BennieO
Full Member
Full Member
Posts: 221
Joined: Thu Feb 06, 2014 8:34 am

Re: Welger AP61 Bailer

Post by BennieO »

Wayne

What do the knotters look like, is it Deering Knotters as on the NH and JD or similar to the ones used on the Claas balers. I have both a NH an Claas, if you can sent me a photo of the part I might be able to give you the part name(not number). I have service manuals for hoth the NH and Claas.

Bennie
Traditions Vortek .50 (Swartkruit)
Aya 12Br (Swartkruit)
CZ550 Lux 30-06
BRNO .22LR MOD 2
Colt detective .38spl
Gecado mod 50 .177
Wayne
Hero Member
Hero Member
Posts: 1007
Joined: Sat Mar 24, 2012 5:36 pm

Re: Welger AP61 Bailer

Post by Wayne »

Ok, will try get photo, thanks
User avatar
BeesBreet
Hero Member
Hero Member
Posts: 1652
Joined: Sat Nov 22, 2014 9:03 am

Re: Welger AP61 Bailer

Post by BeesBreet »

Whatsapp photos of the part to the spares guy...
Wayne
Hero Member
Hero Member
Posts: 1007
Joined: Sat Mar 24, 2012 5:36 pm

Re: Welger AP61 Bailer

Post by Wayne »

Bennie, I hope this helps.
I need the triangular plate at the bottom and the center bolt
Photo0132.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
BennieO
Full Member
Full Member
Posts: 221
Joined: Thu Feb 06, 2014 8:34 am

Re: Welger AP61 Bailer

Post by BennieO »

Wayne

I see it is for a wire, not twine bale. I have the twine balers. I will look and see if I can still find the old wire baler info.
Traditions Vortek .50 (Swartkruit)
Aya 12Br (Swartkruit)
CZ550 Lux 30-06
BRNO .22LR MOD 2
Colt detective .38spl
Gecado mod 50 .177
User avatar
BennieO
Full Member
Full Member
Posts: 221
Joined: Thu Feb 06, 2014 8:34 am

Re: Welger AP61 Bailer

Post by BennieO »

Wayne

The NH part look a little different but the part name is (Plate(ledger)).
Is the part broken or do it have to much ware on it? On my old wire machine I welded the part and filed it to its original dimentions and it worked great. For the bolt you can use any High tensial steel bolt of the correct size.

Hope this help.
You do not have the required permissions to view the files attached to this post.
Traditions Vortek .50 (Swartkruit)
Aya 12Br (Swartkruit)
CZ550 Lux 30-06
BRNO .22LR MOD 2
Colt detective .38spl
Gecado mod 50 .177
Wayne
Hero Member
Hero Member
Posts: 1007
Joined: Sat Mar 24, 2012 5:36 pm

Re: Welger AP61 Bailer

Post by Wayne »

It seems as if the threads are damaged on both ,plate and bolt. I am going to try my luck with closing the hole and redrill and tap and get new bolt.
thanks for the help
User avatar
BennieO
Full Member
Full Member
Posts: 221
Joined: Thu Feb 06, 2014 8:34 am

Re: Welger AP61 Bailer

Post by BennieO »

Can you not drill out the thread and put a longer bolt with a Nylock nut on the bottom of the plate?
Traditions Vortek .50 (Swartkruit)
Aya 12Br (Swartkruit)
CZ550 Lux 30-06
BRNO .22LR MOD 2
Colt detective .38spl
Gecado mod 50 .177
ANDRIES
Sr. Member
Sr. Member
Posts: 353
Joined: Mon Feb 04, 2013 3:56 pm

Re: Welger AP61 Bailer

Post by ANDRIES »

Jy kan Oom Hennie Landman op Outshoorn skakel 082 699 3760.Ek is 100% seker hy sal jou probleem oplos.
Post Reply