JARACAL

Hi
could someone help with a load for my 30-06 in 130gr impala bullets I used 52gr of S361

but found it did not group well but was fast at 3134 fps I would like to use them on smaller game like up to Blesbuck

I normal use 49gr S 365  with 180gr interlock hornadys the do well at 2522 fps

any advice is welcome

Hi Lowtech,

inbox francois b. I know he uses them with very good results in his 30-06. I think he also struggled to develop a load

groetnis

thanks

Hi Lowtech

Try to adjust the seating depth of your loads, it always works to improve groupings.

Hello

The charge that worked the best in my rifle was 47 gr S335. Very accurate load
Speed was 2900 ft sec.

Cheers H

thanks
guys will try this
whats the deepest I can seat the head with out getting and head space problems?

lowtech wrote: whats the deepest I can seat the head with out getting and head space problems?

I have no idea what you mean.
What does seating depth (If that's what you mean with "seat the head") have to do with head space?

Hi Geno

I'm sure you are correct

I'm new to this so please be patience if I get the wording wrong

I see that I need to

"Try to adjust the seating depth of your loads, it always works to improve groupings" as per Dawie

does this not mean seating the head a little deeper into the case ?

will this not in turn create a greater gap between the head and where it enters the barrel which I believe is quite critical

you may PM me with the answer if its quite involved

thank you for any help

Read this thread: http://jaracal.com/index.php/topic,10238.0.html

Once you have determined the max OAL, you can start about 0,2mm from the lands.
Then seat your bullets deeper in 0,2mm increments untill you have found the best group.

thanks for your advice

Weet iemand of Impala Bullets nogsteeds bestaan? My e-posse word nie beantwoord nie.
Sal maar moet bel maar gedink ek vra maar eers hier.
Hulle 458 500G is darem baie goedkoper vir oefen as ander plekke……

Ek het vanoggend nog met hulle gepraat. 087 151 0985