Induksie Annealer

Hier kan toerusting wat self ontwerp is geplaas word soos bv. 'n selfgemaakte "tumbler" of ieta dergelijks

Moderator: Global Moderator

Post Reply
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Induksie Annealer

Post by Reghardt »

Goeie Middag Julle

Ek het uiteindelik my induksie Annealer klaar gemaak.

As daar belangstelling is laat weet asb ek moet weer prate bestel binnekort - Prys sal ek nog bevestig maar ek probeer dit so koste effektief moontlik doen.

Ek sal nog n video post waar hy loop. Kan alles doen vanaf 222 tot 338LM.

Ek is in Durbanville so as daar iemand is wat doppe het wat julle wil uitgloei kontak my gerus dan help ek waar ek kan. Ek kan dan ook sommer die masjien behoortlik verder toets.

Vriendelike GroeteImage

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
User avatar
Gawie(13mm)
Hero Member
Hero Member
Posts: 6027
Joined: Sun Sep 18, 2011 6:53 pm
Location: Paarl

Re: Induksie Annealer

Post by Gawie(13mm) »

Baie netjiese masjien. Ek dink jy behoort meer geld uit daai "hopper" te maak as uit die induksie uitgloeiers. ;D
Wel gedaan.
Dont make expensive noise! Make the first shot count!
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

Gawie(13mm) wrote:Baie netjiese masjien. Ek dink jy behoort meer geld uit daai "hopper" te maak as uit die induksie uitgloeiers. ;D
Wel gedaan.
Baie dankie Gawie.

Die krediet is egter nie als myne nie, maar sal die boodskap oordra.

Groete

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
Apie
Hero Member
Hero Member
Posts: 2663
Joined: Sun Nov 30, 2014 7:53 pm
Location: Lichtenburg, Wes Transvaal

Re: Induksie Annealer

Post by Apie »

Netjies Regard!!

Ek sal belangstel in die feeder!


Sent from my iPhone using Tapatalk
User avatar
Capt. Oblivious
Hero Member
Hero Member
Posts: 11438
Joined: Thu Apr 11, 2013 12:35 pm
Location: Ek weet nie so mooi van spel nie maar ek kan skiet. Lonehill, Sandton

Re: Induksie Annealer

Post by Capt. Oblivious »

Reghardt wrote: Sun May 15, 2022 4:29 pm Goeie Middag Julle

Ek het uiteindelik my induksie Annealer klaar gemaak.

As daar belangstelling is laat weet asb ek moet weer prate bestel binnekort - Prys sal ek nog bevestig maar ek probeer dit so koste effektief moontlik doen.

Ek sal nog n video post waar hy loop. Kan alles doen vanaf 222 tot 338LM.

Ek is in Durbanville so as daar iemand is wat doppe het wat julle wil uitgloei kontak my gerus dan help ek waar ek kan. Ek kan dan ook sommer die masjien behoortlik verder toets.

Vriendelike GroeteImage

Sent from my SM-N980F using Tapatalk

Baie netjies, laat weet wat hy kos asb
A child of five would understand this. Send someone to fetch a child of five.
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

Capt. Oblivious wrote:
Reghardt wrote: Sun May 15, 2022 4:29 pm Goeie Middag Julle

Ek het uiteindelik my induksie Annealer klaar gemaak.

As daar belangstelling is laat weet asb ek moet weer prate bestel binnekort - Prys sal ek nog bevestig maar ek probeer dit so koste effektief moontlik doen.

Ek sal nog n video post waar hy loop. Kan alles doen vanaf 222 tot 338LM.

Ek is in Durbanville so as daar iemand is wat doppe het wat julle wil uitgloei kontak my gerus dan help ek waar ek kan. Ek kan dan ook sommer die masjien behoortlik verder toets.

Vriendelike GroeteImage

Sent from my SM-N980F using Tapatalk

Baie netjies, laat weet wat hy kos asb
100% sal so maak.

Lekker aand

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
JohanvB
Hero Member
Hero Member
Posts: 2086
Joined: Thu Jun 30, 2011 9:28 pm
Location: Welgelegen

Re: Induksie Annealer

Post by JohanvB »

Hallo

Prys asb

Dankie
User avatar
Gawie(13mm)
Hero Member
Hero Member
Posts: 6027
Joined: Sun Sep 18, 2011 6:53 pm
Location: Paarl

Re: Induksie Annealer

Post by Gawie(13mm) »

Dagsê.

Jou boodskap diens is seker vol soos die manne jou pla.
Loer daar vir my boodskap in antwoord op jou PM.

Groete,
Gawie.
Dont make expensive noise! Make the first shot count!
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

JohanvB wrote:Hallo

Prys asb

Dankie
Laat weet sodra ek die finale syfers het.

Groete

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
User avatar
Chris@6
Jr. Member
Jr. Member
Posts: 54
Joined: Thu Dec 18, 2014 7:22 am
Location: Loevenstein, Bellville

Re: Induksie Annealer

Post by Chris@6 »

Hi Reghardt,

Ek stel ook belang, stuur asb finale prys aan sodra beskikbaar.

Dankie
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

Hi Almal

Jammer vir die wag. Ek sal n prys teen einde van die week he (mag dalk vroeer wees).

Ek wag net vir quotes en beskikbaarheid.

Vriendelike Groete

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
Ranger
Hero Member
Hero Member
Posts: 813
Joined: Thu Aug 06, 2015 8:44 am
Location: Stormberg, Eastern Cape

Re: Induksie Annealer

Post by Ranger »

Well done to all involved, it looks great.
Howa 30.06 / 6.5 Creedmoor
Tikka Varmint 300WSM
Beretta SP1
CZ 457 Varmint .22LR
Mahely .22LR
CZ Shadow 2
Glock 19
Astra .22LR revolver
User avatar
LoopSoosStroop
Hero Member
Hero Member
Posts: 1654
Joined: Wed Apr 15, 2015 9:31 am
Location: Randburg

Re: Induksie Annealer

Post by LoopSoosStroop »

Lyk baie indrukwekkend. Ek het al bietjie navorsing gedoen oor hierdie masjiene en dis nie maklik om aan mekaar te sit nie, baie goeie werk hierdie.
Pieter van Deventer
Blok Engineering
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

Baie dankie. Ek is nou al n geruime tyd besig met dit. Hy werk regtig baie lekker.

Vriendelike Groete

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

More Almal

Ek gaan my beste probeer om die produk in die mark te sit vir R9700.

Ek sal egter moet nog parte bestel wat dalk 'n bietjie van 'n lead time sal veroorsaak.

Ek gaan egter net hierdie masjien bou op versoek. Indien julle graag 'n video wil sien sal ek die naweek een opsit wat bietjie meer wys.

DM my as julle nog iets wil weet.

Mooi Dag

Groete
User avatar
Gawie(13mm)
Hero Member
Hero Member
Posts: 6027
Joined: Sun Sep 18, 2011 6:53 pm
Location: Paarl

Re: Induksie Annealer

Post by Gawie(13mm) »

Ek wag nog by die telefoon. :laugh:
Dont make expensive noise! Make the first shot count!
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

Hi Julle

Verskeie mense het al kontak gemaak en meer inligting versoek. Ek het al met Heinrich ook kontak gemaak en sal binnekort advertensie op Jaracal he, maar dit gaan net op versoek gebou word.

Ek moet more parte bestel vir die manne wat bestel het.

Julle is welkom om kontak te maak indien julle nog belangstel.

Gawie gebruik al syne n geruime tyd

Groete

Sent from my SM-N980F using Tapatalk

CZ 550 308 laminated varminter
CZ 550 22-250 laminated varminter
Howa 6.5 CM
Howa 6mm CM
Sako Forester 243
CZ P10F
User avatar
Jackalsniper
Hero Member
Hero Member
Posts: 593
Joined: Sun Sep 23, 2012 9:39 pm
Location: Kraaifontein Kaapstad

Re: Induksie Annealer

Post by Jackalsniper »

Is daar dalk n video van hoe hy werk?
Groete
User avatar
Gawie(13mm)
Hero Member
Hero Member
Posts: 6027
Joined: Sun Sep 18, 2011 6:53 pm
Location: Paarl

Re: Induksie Annealer

Post by Gawie(13mm) »

Dont make expensive noise! Make the first shot count!
User avatar
Reghardt
Sr. Member
Sr. Member
Posts: 327
Joined: Sat Jun 30, 2012 9:40 am
Location: Durbanville

Re: Induksie Annealer

Post by Reghardt »

Dankie Gawie

Groete
Post Reply

Return to “Projekte self ontwerp/Projects self-made”